I've written many times in this blog about how fortunate I am to have the perfect, all-purpose workshop for all my tools and a double garage for the automotive projects. Beyond the size of the workshop, the best feature is the window which looks out onto the backyard. This post was intended to document converting the window into an exterior door, and the importance of installing a glazed door....but then I started thinking about all the different "shops" I've had since I moved to the USA and they didn't all have natural light....
The first 'shop, if you can call it that, was in the basement of our rental house in the posh part of Berkeley. Space was at a premium, so it was just my old ikea desk, a crappy chest of drawers with a bookshelf on top, and some tools hung on the wall. There were no windows in the basement, but it did have an exterior door which could be left open for some natural light.

This was when I started acquiring tools...
Workshop number two was the double garage when I lived in the Oakland hills the first time round. The two timber benches that I still have were built to fit into this garage.

I imported some
toolboxes from the motherland in 2008, which has been well documented in this blog. The tools below came with them. I was proud off my hand tool collection at the time. This
saw can be seen in the top left.

The garage had a huge rear-facing window with a beautiful view of the hillside:
I got my first table saw during this period.
The space became very cramped after I bought the '68 Mustang coupe:
The next stop was what became known as the Green Room, for obvious reasons. I had a very nice setup in this garage, and although it did have a window and a glazed door, I covered them both up for total privacy. I didn't really do anything apart from work on the car in this garage; the table saw was never put together.
I was only based at the Green Room for about fourteen (14) months, but I spent a LOT of that time working on the Mustang. The photo below, which is still one my favorite pictures of the car, was taken in this garage. When I bought my Mustang, I put all the money into getting a really good body shell, because I didn't want to do any significant welding. It turns out this was a smart move, because everything else has been replaced at this point, some things more than once.
The next two photos were taken the day I moved out of the Green Room; the '68 went a day or two after everything else. As you can see, still no engine...
Workshop #4 was a deep single-width garage a few blocks from
Pixar. The next two photos show the garage after the first batch of "stuff" was moved from the Green Room, and after the Mustang and the second batch were transferred:
It took many months to convert the garage into a space I could work in, but in the end, I had a nice little setup. Again, no table saw, and no natural light, by default this time.
This garage was always cramped, but I did a lot more work on the car here and I had some memorable times, including dropping in the V8 with the transmission attached. The first time.
The car didn't look that different on moving day, but in addition to the drivetrain it has been completely re-wired at this point, the front end has been replaced and most of the dash and interior components have been re-installed.
The fifth workshop consisted of two (2) distinct entities. The '68 went to a double-width rental garage on Channing Way in downtown Berkeley. The lighting in this garage was never great and there was no natural light. I had the car on one side and a workbench and my tools on the other side.


This garage was never my favorite place for a number of reasons: I wasn't supposed to be working on a car in there at all, so I had to be as quiet as possible, and there was no sink or bathroom nearby. Having said that, I got a lot of work done while the car was in this location, including reinstalling the windshield and back glass - with some help from Amy Sheep. When it was time to move on, the car was running, the only problem was I didn't have anywhere to move it to. I ended up putting the '68 into storage out by Oakland airport; it was gone almost a year before we bought our current house, back in the Oakland hills.
While the Mustang was sitting three (3) blocks away, Amy and I built a 16' x 12' shed/workshop at the end of our backyard. The shed did get windows eventually, but there don't seem to be any surviving photos to prove it.
The shed was a mixture of workspace and storage:
The table saw was finally reassembled but anything long had to be cut with the shed door open. And the shed was never connected to the grid, so lights and power tools had to be run from an extension cord.
All of which makes the current setup workshop #6:

And garage #5 (or #6 if you count the term in storage):