Showing posts with label picture framing. Show all posts
Showing posts with label picture framing. Show all posts

Friday, December 12, 2025

More Picture Frames

Just last month I made a batch of custom picture frames, and I thought at the time that it would be a while before I made any more....Wrong! I already need more due to the recent arrival of a series of prints I had forgotten I'd ordered. I'm going to make two identical frames and rotate the artwork, mainly because I am running out of hanging space. I'm using more recycled oak; these pieces came from an old table and have a number of holes to work around.


The base material is 1/2" x 5/8" oak:


Several passes through the router table and I have my basic molding - I rounded over both visible corners and cut a 3/16" square rabbit:


Mitered the molding into appropriate pieces - the internal size of the frames is 11-3/4" x 16-3/4" and I am not using any mount card. 


When assembling rectangular frames, it is important to construct pairs of long and short sides first, all in the same orientation. Each pair can then be coupled: 



The oak frames were sprayed first with primer...


...and then several coats of black semi-gloss:


I had a piece of 18" x 24" glass leftover from the last batch of frames. I cut off an 16-3/4 wide section and then trimmed both pieces. 


I'm planning to rotate the artwork in these frames, so I installed turn buttons instead of staples and tape as I usually would:


Cleaned the glass, mounted the artwork and installed D-rings and picture wire:


I have a selection of six reproduction adverts from the London Underground; these two are going up first:

Sunday, November 9, 2025

Picture Frames

We've got some new artwork that I would like to frame - some of it was picked up on our Southern States tour, and some of it has been waiting to be framed for a couple of years. This was a great opportunity to get back into my wood shop -  most of the last year has been devoted to automotive projects and I was ready for a change.

I started with an oak panel which came from an old CRT TV cabinet we acquired when we bought our house: 


The panel was cut into strips on the cabinet saw:


The oak strips were jointed, trimmed to final width and planed to give material of uniform dimensions (about 5/8" x 1 1/2").


I don't have a proper router table at the moment so I made a temporary setup next to the miter saw station. I'm hoping to get a nice router table for my next birthday, so watch this space.


A 1/4" x 3/16" rabbit was cut into all the material:


I used the coving bit to cut grooves in the molding at both sides:


All the frame pieces were cut on the miter saw:


I've had what I call an underpinner for a long time; this one is pretty basic and requires loading the wedges/V-nails manually: 


Frames assembled:


After sanding, the frames were stained either English chestnut or flat black and left to dry overnight:



The frames were finished with Rubio, which removed some of the flat black stain, but did not appear to affect the English chestnut.


While the Rubio was curing, I found one more poster that I wanted to frame, but I didn't really want to go back to cutting up oak paneling. Instead, I had a hunt around in my wood rack, and found some suitable trim pieces. I think this material came from an old table or a dresser that I recycled.


I cut a rabbit into the material, but otherwise I just mitered the pieces and used it "as-is" without any staining or re-finishing.



I picked up a couple of sheets of ivory mount card from Blick on Broadway, and I got my glass from one of those big box stores that don't need any publicity. That was all I had to buy for this project.

Cutting rectangular pieces of mount card for each frame:


Cutting mounts - After years of trying to do this with a ruler, I finally splurged on a very basic mount cutter:


I bought several 24" x 36" sheets of glass and started by cutting all of them in half. This gave a stack of 18" x 24" pieces which can be trimmed to fit each frame. My glass cutting setup is the most basic:


Glass cleaned and frames assembled:


Installed D-rings and picture wire:


I was a beautiful late November day, and I had the shop window open while I was working:


This is a few days later: 
 




Friday, May 29, 2020

Antique Medical Tins

I like to collect stuff. I'm not really sure why, neither of my parents are collectors - they call collecting "hoarding" and talk of hoarders with disdain, even though I know for a fact my Mom had a pretty decent stamp collection in her youth. And my maternal grandfather used to collect old keys; he had hundreds of them hanging from the ceiling in his garage. With me it started with vinyl records and cds, posters, stuff like that. More recently its been tools, antiques, guitars, cloth patches, and even original matchbox cars, some of which I've been restoring.

One of my favorite things to collect is antique metal tins. This collection started with the old Germolene dinner money tin I used to take to school back in the mid-70's - back when a one pound note was enough for a whole weeks school dinners. Mind you, I would have happily paid a quid a week NOT to have to eat the muck they used to serve up.

I spent a little while organizing some medical-themed tins into a rectangle and then I made the frame shown below from some off-cuts of 2" x 1" oak I had on hand. I cut identical rebates at the front and back of the frame. This is actually a project that I started over a year ago and then finished up during the shelter-in-place that's just ended.


The frame had been sitting around for a while when it was rediscovered. I sanded it down to 400 grot and wiped-on some English chestnut stain.


When that was dry, I laid on two (2) coats of satin polyurethane.


The front "glass" will be cut from a sheet of polycarbonate. I might replace it with non-reflective glass in the future.


The back panel consists of a scrap of pegboard and a sheet of mount card to which the tims were attached with double-sided sticky tape, as it is known to Blue Peter viewers. The back panel is removable if necessary.


This is the finished look. The metal corner pieces which hold down the glass/polycarbonate are nailed on with the world's smallest pins. My favorite tins now is the green Selaxa tin that I inherited from my maternal grandfather (it was in his tool chest), and the Germolene tin. My brother used the adjacent Elastoplast Airstrip tin for his dinner money.


Tuesday, April 21, 2020

Temple Newsham Golf Club

I've been fortunate to inherit two of my Grandmother's paintings. One of them was given to me without a frame - this painting actually hung in my parents dining room for probably twenty years, but apparently never had a proper frame.

The painting shows the clubhouse at Temple Newsam Golf Club. I think it was probably painted in the late 1960s. The clubhouse is still there today, although the entrance has been changed around to make it accessible to all, and the windows have been replaced with modern double glazing. It's an odd shaped building which is actually very well represented in the painting.

The golf club recently fought off permanent closure when Leeds City Council tried to convert both golf courses into cycle parks; the eventual compromise left two new course layouts: a reduced 18-hole circuit and a much smaller 9-hole half-round. Personally I can see the advantage of a short course. I've only played proper golf once, but by about hole thirteen I was in serious need of a strong cuppa tea and a new upper body.


The Covid-19-related slowdown in my business (and every other one too of course) means I have some extra time to tinker int 'shop, and I decided to invest some of this time in knocking up a decent frame for Grandma's painting. I want to hang this in my bedroom near to another of her paintings. I found a piece of 2" x 1" black walnut left over from another project,* and I cut it into several ½" x ⅜" strips on the table saw - this painting needs a narrow, understated frame.


I cut a rebate on the router table, which gave some square edge molding close to what I was looking for.


I cut a tiny bevel on the leading edge - this softens the molding and makes it look slightly narrower.


The miters were glued and pinned with what Amazon calls "V-nails." They were wedges in my day, and you installed them with an underpinner. I left the frame in clamps overnight, although this is probably not necessary.


The next day I applied walnut wood filler to the corners and when that was cured and sanded, I wiped on some polyurethane.


This is how it looks on the wall:


The "Lamp Light" painting is hanging in the same room:


*(Regular readers can probably guess which one!).