Saturday, February 17, 2024

From The Archives #8 - The White Stripes

Originally published 2005-12-10

The White Stripes


Venue: Bill Graham Civic Center, Grove St, San Francisco

Date: Dec 9, 2005

Venue Vibe: a bit like a truncated Wembley arena, capacity  ca. 8000.

The Low-down: The outrageously early start time for Live 105's Not So Silent Night, San Francisco’s annual end-of-term rock bash, and the chemistry Christmas party being on the same evening combined to force our absence through Hot Hot Heat and Autolux.  What’s more, the 20 or so minutes we spent in the beer line cost us not just forty dollars for a few cups of warm Bud (!) but also the chance to see Coheed & Cambria in the flesh, our appreciation of their set being restricted to what we could hear through the auditorium wall.  Still, at least we got to check out Death Cab for Cutie who sat firmly on the fence between indie rock and pop rock, a genre once defined by the Stone Roses or more recently the Stereophonics second album. 

And so to this year’s headliners, the White Stripes.  After five solid albums, Jack White and his bandmate Meg have proved to be much more than the novelty act they first appeared.  In fact, one is often moved to ponder whether the quantity of noise the duo produce between them represents some kind of world record.  Add this to the catchy choruses of hits like “Hotel Yorba” and “Jolene” and they seem to have everything.  The trouble is, that one never really believes the pair are giving it their all in the live setting; instead they give the impression of a band holding something back for the second show.  

What’s more, while Jack’s musical talent and ability is not in doubt, Meg is never going to be confused with Keith Moon, or even Ringo Starr come to think of it; to paraphrase John Lennon, one gets the impression that Meg is not even the best drummer in the White Stripes.  She does however have exceptionally big tits.  When the band left the stage in low-key fashion after a mere 25 minutes, we assumed either a rift, or a technical difficulty was the cause, but no: after a lengthy hiatus they returned for a few more songs, and that was it, lights on and all done.  A very short show from a band I will continue to listen to, but can live without seeing live in the future.

Review by Westoid

Sunday, February 11, 2024

Uncle Herbert

To say that the tool chest post provoked an outpouring of family nostalgia would be an exaggeration, but it did lead to the uncovering of some interesting new information which is worth adding to the story. 

First, a bit more background: Uncle Herbert was my Dad's uncle, and so strictly he was my great uncle, but he was never referred to as that by me or anyone else. My Dad's Mother, and my Grandmother, Irene, or "Reeny" as my Grandfather called her, was the second eldest of four siblings:

Blanche -  July 13, 1909 – June 1969 (59).

Irene - December 10, 1910 - February 3, 1986 (76).

Herbert - May 24, 1913 - July 23, 2005 (92)

Harold - March 1915 – late 1998 (83).

Uncle Herbert lived at 131 Saville Road in Castleford, the family home, all his life. My father also lived there for at least the first three years of his life, though his precise date of departure is the subject of some conjecture. 

131 Saville Road was rented from a private landlord until sometime in the 1970s when Herbert purchased the house. Originally it had three (3) bedrooms upstairs, two (2) reception rooms downstairs - one of which was hardly ever used - and a kitchen at the rear. The tiny bathroom, with just a standalone tub, was beyond the kitchen. The toilet was located at the very rear of the building and could only be accessed from the backyard. There was no sink outside of the kitchen. After Herbert bought the property one of the bedrooms was converted into an upstairs bathroom. Visitors however were still encouraged to use the outside toilet which typically required negotiating a pathway around Herbert's bicycle.

131 Saville Road, 2023.

131 Saville Road from the rear, 2023. 

Visits to the house in my day would start with either my grandfather or my father parking the car in the perpendicular and aptly named Cross Street, and entering the property via the back alley. It was the fourth house from Cross Street and had a wood panel back gate that was painted a horrible green color in the late 70s. Inside the gate was the air raid shelter, the outside toilet, a tiny yard and then the back door which opened into the kitchen. The only time I ever entered the house through the front door was in about 2002 when I helped my father move a twin bed into the property.

From the time when I first visited the house until Herbert passed away in 2005, the décor was stuck in the 1970s. For example all the interior doors had been covered with plastic faux woodgrain panels. But the rest of it was an odd mix of ancient and modern. The kitchen stove looked like it came out of the ark, and had to be lit with a match every time it was used; whenever I watched Herbert do this sparks would fall from the match and land on the linoleum...but he was also the first person I knew that had a microwave oven. 

Herbert was actually the most forward thinking relative or friend I can think of. He bought my Dad a gas-powered camping stove back in the 50s when everyone else was still cooking over unreliable kerosene-fired primus stoves. He also had one of the first VCR's under his tellybox, long before they became common, and even longer before we had one in our house. Having said that, the only thing I can remember Herbert watching on the TV was horse racing. 

Herbert was retired by the time I knew him. He spent his working life as a brickies' laborer but during WW2 he served in the Army in Belgium, where he a batman to a senior officer. A batman was essentially a personal servant and was seen as a desirable position since the appointee was exempted from more onerous duties and often received better rations and other favors from his officer. The post was abolished after the war.

In the late 70's/early 80s Herbert had an allotment or community garden adjacent to the parking lot at what is now the Carlton Lanes shopping center. It was close enough to Saville Road that he could ride back and forth on his bicycle. He was always trying to give away produce to my Mum, typically garlic or sprouts. One of his neighbors at the allotment was referred to as "Tut Pole" on account of being of Polish origin. Nobody actually knew what his proper name was.

Herbert used to come to my Grandma's house in Ferry Fryston once a week for lunch. I think it was on Fridays. At other times, my Grandparents would bring fish and chips over to Herbert's house. I know this because I was there on one occasion. I think it's fair to say that Herbert's pantry was not really stocked to my liking. I didn't want a cup of tea with my fish and chips, and there was not much else on offer; I was forced to settle for some milk in a china cup that came with a saucer. When I was done with my food I asked my Grandma what was for dessert, or "afters" as we used to call it. "Oh" she replied, "Uncle Herbert dunt bother wit afters." I was crushed. To cheer me up, Grandma took me next door to check on Herbert's then very elderly neighbor Mrs Able. I think she was about 98 at the time and if not she certainly looked it.

Uncle Herbert was keen on sport - he was a very good lawn bowler and a decent snooker player. He had a stack of trophies for snooker and billiards, most of which came from competitions at Castleford Liberal Club. Somehow or other he played a frame against Joe Johnson the 1986 Snooker World Champion at Smawthorne Lane WMC in Castleford in January 1988.

Herbert with Joe Johnson following his 37-64 defeat.

It turns out that the tool chest which spawned this article was a 21st birthday gift to Herbert from his family. This makes sense because he would have turned 21 in 1934 and the tool chest was advertised in Practical Mechanics at that time. He used to keep the tool chest on the top shelf in the downstairs closet. I think he'd be happy to know that some of his tools are still being used almost ninety (90) years after they were purchased.

Of Herbert's siblings, the oldest was Blanche, my father's favorite Auntie - and that's saying something because he had almost a dozen to pick from. Blanche and her husband Harold Spawforth lived at 123 Saville Road in the 40's and 50's, just a few doors along from Herbert and the rest of the family. While researching this article we have discovered that Harold played six (6) times for Castleford RLFC /Castleford Tigers between 1930-1932. This was mentioned just once to my father, so not exactly something Harold dined out on. Auntie Blanche sadly passed away before I was born.

The youngest of the four was my father's Uncle Harold who married Olive Muscroft in 1938 and moved out to the wilds of Doncaster. The family used to call him "the young 'un." The geographical separation of twenty (20) miles from the olde homestead meant I didn't see much of them. I mainly remember Auntie Olive for kitting me jumpers at Christmas. When Uncle Harold passed away he left me a thousand pounds in his will. I was a poverty stricken second year undergraduate at the time and that money meant I could buy my first computer. My Dad said that Harold wanted to leave money to people that it would make a real difference to, and he achieved that.

My Grandma deserves her own piece, which I will link to when it eventually appears.

Friday, February 9, 2024

An update on the deck

As I have mentioned in several posts, it has been railing a LOT lately, and may well continue to do so until April...! This makes it impossible to work on the deck...

And. if that wasn't bad enough, the bit of the deck that we have "partially" installed leaks like a sieve into the garage. It started off with a few blistered sections of the ceiling...



And progressed to this....



At the time of writing, mold is growing on parts of the ceiling and a lot of the left side wall:

Stay tuned for further developments....

Wednesday, February 7, 2024

More workshop refinements

At the time of writing, it is STILL raining. We have had the odd nice day here and there, but not anywhere near enough to get back to the deck project. The only positive is all the work I've but able to do in the 'shop that I normally would not have time for. I'm still working my way through the plywood I salvaged from the deck. When I left off, I had finished the window wall in the shop and built my clamp rack. But there was another area that needed attention - the wall behind the furnace and where I store some of my guitars and a whole load of other stuff has never been finished. This is how it looks with all that gear removed:



This is the same area after an number of hours work installing more of the salvaged plywood. Unfortunately my Dad was not around to remove the nails this time...


I had to work my way through a lot of small pieces towards the end:


When I "plywood-ed" the other wall I thought about getting the paint out, and decided....maybe in the future. This time though I was a bit more motivated. I can't imagine moving all the junk out off the way just to paint, and I have time, so I got it done:


I also installed a light in this area which has a pull cord so will only be "on" when it is actually needed rather than coming on with all the other shop lights.


Filled back up with "junk"


Went back and did the other wall while I was at it....


The cinder block wall at the front of the shop was painted white a couple of years ago, so that just left this area:


So I did that as well...it's worth mentioning that this is primer/stain blocker and I put on two (2) coats for pretty much uniform coverage. In the future I may paint the shop an actual color, we'll see...


I put up another piece of peg board above the grinding wheels and metal work vice. I'm going to move some of the tools I use over here away from the woodwork bench (which is all of five feet away...)


One other quick thing I did was install an extractor fan in the table saw room:


I used a leftover bit of ducting from the clothes dryer to route the fan to the exterior. This area can become damp in the winter, so I want to keep the air moving around and (hopefully) prevent mold/mildew formation. I'm running the fan on a timer with a 4 hours on/4 hours off cycle. This will be a cheap solution if it works. 

Sunday, February 4, 2024

Turlock 24

The weekend before the one which is about to end was the 57th Annual world-famous Turlock Swap Meet. What began in 1966 at the parking lot at the McHenry Village shopping center in nearby Modesto, and welcomed just six (6) vendors and a handful of buyers, has grown into one of the biggest automotive swap meets on the West Coast. The modern event hosts more than 1,000 vendors and over 20,000 total attendees over two days. The swap meet uses every available square inch of the Stanislaus County Fairgrounds in Turlock to create 2,067 vendor spaces which offer parts, accessories, vehicles of all types, all things car related and a good many totally unrelated articles too. 

My first visit to Turlock was back in 2011, and I've been at least half a dozen times since. I've learned over the years that at least three things are guaranteed about the swap meet: It’s always held on the last full weekend of January, it will feature more rusted metal and dulled chrome than you can shake several large sticks at, and it will be a mega early start. The swap meet also has a well-earned reputation for being very foggy and absolutely freezing, although it was actually very pleasant this year. 

I set the alarm for a very antisocial 5:15 am, and set out on the two hour drive south, only pausing to grab a gas station coffee and pick up one of my BAMA mates. Together we negotiated the pitch black back roads successfully, found parking and joined the queue of eager parts hunters just before 7:30. 

Once inside we had the dilemma of whether to search for Mustang parts or hot chocolate first. That one was actually pretty easy. What followed was a systematic walk around the entire site. The layout of the sales grounds at Turlock can be a bit confusing if you're not familiar, but we've been so many times now we know how to pick our way through the stalls. It helps that a great many of them are in the same location every year. 



Turlock is not just a place to track down the radio delete panel for your '65 GT350. You can find everything from a dodge charger to a battery charger, not to mention a wide variety of automotive memorabilia, well-stocked tool corrals and a whole bunch of unrelated items. We came across a very well-worn copy of "Fix Your Chevrolet" this time around and in the past I've even seen a group of would-be felons trying to hawk a genuine bear skin rug! 


I've had some good luck at Turlock in the past - the third member in the '68 came from here at an excellent price - but it's not really a place to look for a specific thing, it's better to just see what comes along. This year I was keeping an eye out for a center console that might look nice in the Mustang and maybe a few items I could restore - and I got very lucky with a vintage gasoline can and a more-than-100-year-old fire extinguisher. I've seen a restoration of one of the latter on youtube and I can't wait to have a go.....watch this space!


Tuesday, January 30, 2024

Miter Saw Station

While the cat is away, the mice will play! Or to put that another way, while it is still raining outside, the workshop is the only place to be! 

I've got a nice Dewalt miter saw in my shop - the same one I've been using since about 2008, although I've been through a number of blades since then. In September last year, when I reorganized the "big" tools in my workshop and connected up the dust collection system, the miter saw ended up at the front of the main shop:


I've spent a decent amount of time working in the 'shop since then and have determined that this is a good central location where the miter saw is going to stay. So.....after all these years of use, it's finally time to build a proper miter saw station. I'm making use of some lumber I salvaged from the pallet that was used to deliver our new deck boards and, of course, more of the plywood that was "recovered" from the deck.


I can't say I designed this myself because I didn't - I copied this build on youtube. It is a very simple but strong design where each leg is made up of two sections of lumber which are glued and screwed together: 


A pair of legs can then be connected using two shorted sections of timber and several pocket screws: 


Two such assemblies can be bridged with three longer pieces and the top strengthened with several cross-braces. I am deliberating leaving the base of the structure "open" at the front because I plan to build drawers and cabinets to go in these spaces in the future.


Moved the first bench into its approx. position:


Then I made a second identical bench and constructed a platform between the two benches to hold the miter saw. The platform sits about six inches below the top of the benches. 


I used the laser level to get the benches absolutely level, and then anchored them to the cinder block wall with tapcons:


I installed plywood top panels on both benches and at the central platform. I cut the panels slightly oversize and then trimmed the excess off with the handheld router to achieve a perfect fit.


At this point the saw bed sits fractionally below the level of the benches:


I used some large washers to shim the saw bed up to the perfect height:



I had to add an outlet for the saw - it has been running of extension cords for the last few months:


The miter saw is too far away from the dust extraction system, so I will be using the shop vac to harvest dust from the saw. I also added outlets below the central platform to power the shop vac.


The final step is to build the fences. I'm using two strips of 3/4 inch plywood which are fastened together at 90 degrees:


The front plate is made from a third strip of plywood - this makes a very rigid assembly. Before adding the front plate, I cut a 1/4 inch x 3/4 inch groove for the T-track channel (blue) and a very shallow 1/2 inch wide recess for the measuring tape:


Cross-section of the final assembly: 


I used the laser to align the two fences and the saw prior to the final install. The fences were attached to the benches with wood screws and the saw was fastened to the central platform with lag bolts.


I installed the self-adhesive measuring tapes last. I have left-to-right and right-to-left tapes, so I can cut on either side of the blade. The tapes were lined up and trimmed very carefully... 


I also made some "first attempt" stop blocks. I have a couple of thoughts on how I might refine these in the future:


The finished miter saw station - it would have been much easier to build this if I already had it...